Subscribe for exclusive deals.
We do not share or sell your information.
CDi 2000 Two Channel 800W @ 8 Ohm 70V/100V/140 Volt Power Amplifier
CDi 2000 Two Channel 800W @ 8 Ohm 70V/100V/140 Volt Power Amplifier
$1,441.65
This a rugged amplifier designed for installed audio applications. The CDi2000 provides accurate, uncolored sound with low distortion for excellent music reproduction. It handles a wide range of speaker impedances & outputs, making it very versatile.
The CDi 2000 from Crown Audio is a rugged, lightweight amplifier designed for installed audio applications. CDi stands for "Contractor Digital Intelligence". The CDi 2000 provides accurate, uncolored sound with low distortion for excellent music and vocal reproduction. It also handles a wide range of speaker impedances and outputs, making it very versatile.
Advanced protection circuitry guards against shorted outputs, open circuits, DC, mismatched loads, general overheating, high-frequency overloads and internal faults. The CDi 2000 also has integrated DSP presets for crossover frequencies, EQ, limiting, compression, delay, and a subharmonic synthesizer. A backlit LCD displays relevant information.
Features
- Rugged and lightweight steel construction
- Operates in dual or bridge-mono modes
- Rack mountable
- Excellent sound reproduction with low distortion
- Advanced protection circuitry protects against overheating, overloads, and shorts
- Switch-mode universal power supply
- Wide range of speaker impedances and outputs
- Backlit LCD
- Integrated DSP
Crown Audio CDi 2000 User's Manual
Specifications
|
Frequency Response |
20Hz - 20kHz ( @ 1W into 4 Ohms ) |
|
Sensitivity |
1.4V @ 8 Ohms |
|
Signal to Noise Ratio |
100dB |
|
Voltage Gain |
30.5dB ( @ 1kHz, 8 Ohm Rate Output ) |
|
Load Impedance |
Rated for 2-8 Ohms in Stereo Mode |
|
Input Impedance |
20 kOhms ( Nominal ) |
|
Output Power |
1000 Watts @ 2 Ohm Dual ( Per Channel ) |
|
Damping Factor |
Better than 500 from 20Hz to 400Hz |
|
Crosstalk |
> 70dB Below Rated Power, 20Hz to 1kHz |
|
Max Input Signal |
+ 22dBu Typical |
|
Inputs |
2 x 3-Pin Removable Phoenix-Type |
|
Outputs |
4-Position Barrier Strip with Connectors for Dual Loudspeakers or Bridge-Mono Loudspeaker |
|
Power |
100V, 120V-240V, 50/60 Hz |
|
Dimensions |
( W ) 19 x ( H ) 3.5 x ( D ) 12.25" |
|
Weight |
19 lbs |
|
Packaging Info |
|
|
Package Weight |
22.85 lb |
|
Box Dimensions ( L x W x H ) |
22.8 x 19.0 x 6.7" |
Contact us to inquire how you can finance your purchase through our partner, 
.
Reviews
0 stars based on 0 reviews
