Optimize Speaker Placement & Focus

An important aspect of the speaker stand design is the ability to adjust the height and tilt angle of the supported speaker enclosure to optimize its position relative to the listener and eliminate sound wave reflections off the supporting surface.

In a typical Desktop Audio Workstation ( DAW ) configuration, the listener is positioned 3 to 4 feet from the monitors with ear level approximately 20″ above the work surface. Raising and tilting the monitors to the optimum position can be achieved in these circumstances using the IsoAcoustics speaker stands.

Patented IsoAcoustics Isolation 

Exciting the Supporting Surface

The isolators manage the energy of the speaker to reduce vibrations resonating through the supporting surface to eliminate dissonant sounds in the listening area or joining rooms.

Reducing Internal Reflections

Internal reflections are vibrations reflecting back up the speaker cabinet which causes smear. Smear is a result of artifacts replicated in both channels which are perceived to be in the middle, causing the stereo image to collapse. The IsoAcoustics isolators reduce internal reflections to eliminate smear. The result is an improved stereo image of natural spatial sound.

Specifications

Dimensions Short Setting: ( W x D x H ) 6.1” x 7.5” x 3 

Dimensions Tall Setting: ( W x D x H ) 6.1” x 7.5” x 8.2" 

Tilt: up to 6.5 degrees

Weight Cap Short Setting: 40 lbs 

Weight High Cap Setting: 35 lbs -40 lbs 

Quantity: 2 Stands ( 1 Pair )