THE NEW HERITAGE FLAGSHIP SPEAKER - DESIGNED AND MADE IN THE USA

The Klipsch Jubilee is the final project that founder Paul W. Klipsch (PWK) worked on. It was his dream to create a fully horn loaded speaker that would satisfy the most ardent audiophiles. Originally intended to be the successor to the Klipschorn, PWK soon realized it was much more than that. Twenty-first century advancements in engineering and technology have allowed Klipsch to make his dream a reality. Experience the magnificent presence, power, detail and emotion of live music at home like never before.

HIGH FREQUENCY COMPRESSION DRIVER

The Klipsch Jubilee features an all-new large format compression driver with a 7” axiperiodic Titanium diaphragm. The single, large diameter diaphragm provides very wide bandwidth performance, eliminating the need for a mid-range driver – true to Paul Klipsch’s original Klipsch Jubilee design. This wide bandwidth design lowers the crossover point below the critical vocal range for seamless clarity and accuracy. The axiperiodic design delivers a smooth response, while still maximizing output and minimizing distortion for effortless performances.

BOOK-MATCHED WOOD VENEER

Klipsch only uses book-matched wood veneers for the Heritage series. The veneer leaves are kept in order as they are delicately sliced from the timber and precisely arranged to provide a mirror image at the splice joint — like turning the pages of a book. This gives each speaker an aesthetically appealing and consistent appearance that is treasured more than any other cut of wood veneer.

MATCHED PAIRS

Every pair of Heritage series loudspeakers are grain-matched using wood veneer panels that come from the same timber. Each cabinet is carefully matched so that each speaker in the pair is practically indistinguishable from the other. The speakers move seamlessly together through the factory, and each finished product is inspected and labeled with sequential serial numbers, ensuring that your Heritage series speakers leave the factory as a meticulously crafted set.

BUILT TO LAST

While each and every component of the Klipsch Jubilee is built to last, Klipsch has always recognized the unique and critical role of a loudspeaker’s cabinet in the sound reproduction process. From the craftsmen in Hope, AR to the engineers in Indianapolis, IN, Klipsch has always put an extraordinary emphasis on cabinet design. The Klipsch Jubilee enclosure is assembled using only the highest-grade adhesives and fasteners. This is a speaker you will hand down from generation to generation.

SPECIFICATIONS

- Frequency Response (+1.75 dB/- 3 dB) 18Hz – 20kHz

- Sensitivity1 Avg.

- Sensitivity of HF - 110dB Avg.

- Sensitivity of LF - 107dB

- Power Handle (CONT/PEAK) LF - 300W / 1200W HF - 100W / 400W MAXIMUM SPL 125 dB/1m (Using DSP)

- Nominal  Impendance LF - 8 ohms, minimum 3.5 ohms at 160Hz HF - 16 ohms, miminum 7.6 ohms at 4.3kHz

- Crossover Frequency: 340 Hz

- High Frequency:  K-693 7”

- Titanium Diaphragm:  Compression Driver with 5” Voice Coil

- Low Frequency Driver Dual: K-283 12”

- Fiber-Composite:  cone woofers

- Enclosure Material: MDF Imputs 5 way binding post

- Height: 69.5” (175.26 cm)

- Width: 50.25” (127 cm)

- Depth: 30.25” (76.2 cm)

- Weight: 330 lbs (149.68 kg) HF - 78 lbs (35.38 kg)