Subscribe for exclusive deals.
We do not share or sell your information.
Bronze W 10 Subwoofer
Bronze W 10 Subwoofer
$975.00
If you love deep & refined bass notes, the Bronze W 10 is a must-have addition to your speaker set-up as every soundscape is effortlessly reinforced by our beautifully designed subwoofer. Free shipping to Continental US only !
The Bronze W10’s long-throw 10" C-CAM subwoofer driver combines with the 10" auxiliary bass radiator to bring a vivid realism to any performance.
Our engineers have acoustically improved the driver and bass radiator by reducing the moving masses and tuning the compliances in the system to improve the transient response - kick drumsand explosions now have much more punch and precision. Reduced moving mass and improved rubber feet allows more energy to be transmitted directly into the room rather than being lost through mechanical vibrations through the floor and walls.
The Bronze W 10 is a stunning addition to any room.
Key Features
- Long-throw 10" driver featuring ‘dished’ C-CAM
- 10" flat panel Auxiliary Bass Radiator ( ABR ) positioned underneath the unit
- Class D amplifier with high current Switch Mode Power Supply ( SMPSU )
Specifications
System Format: Long-throw 10" driver featuring ‘dished’ C-CAM cone. 10" flat panel ABR (Auxiliary Bass Radiator) 18 mm MDF internally braced construction
Lower Frequency Limit: -3 dB @ 33 Hz / -10 dB @ 28 Hz ( free field ) Default preset: Music, -3 dB @ 29 Hz / -10 dB @ 25 Hz (In-Room)
Upper Frequency Limit: -6 dB @ 150 Hz
Drive Unit Complement: 1 x 10" C-CAM subwoofer driver featuring a 2" long throw voice coil
Linear Driver Excursion: 17 mm peak to peak
Amplifier Output: 220 watt
Amplifier Classification: Class D with high current Switch mode power supply (SMPSU)
Phase Control: 0 Degrees & 180 Degree pure Invert
Low Pass Filter Alignment: 4th order (24 dB / Octave), from 50 Hz to 120 Hz
Equalization DSP: 3 pre-set modes: Music, Movie, Impact
Auto Sensing: Line Level >3mV Auto Standby feature after 20 mins
Audio Input: LFE unbalanced input RCA, Stereo unbalanced inputs RCA
Input Impedance: 20k Ohms input impedance
12 Volt Trigger: 3.5 mm mono mini-jack. 6 Volt threshold
Electrical Certifications: CE / CB / ETL / FCC / CCC / ErP (Energy saving compliant)
Mains Input Voltage: 100 – 120 VAC, 50 – 60 Hz / 220 – 240 VAC 50 – 60 Hz (manually selected)
Power Consumption: Maximum 300 watt, Standby <0.5 W (ErP compliance)
Fuse Type: 20 mm T4AL 250 VAC
External Dimensions: Including amp, drivers, terminals & feet ( H x W x D):14 7/16" x 12 5/8" x 14 5/16"
Weight (unpacked): 29 lbs
Reviews
0 stars based on 0 reviews
