CW 10 Powered Subwoofer

CW 10 Powered Subwoofer

$1,299.00
          (0 reviews)
Out of stock
+
  Add to Wishlist
The CW 10 places all the power in the hands of installer & client. Engineered for IP control, bass quality & concealment in-room, the compact CW 10 will add explosive bass frequencies to music & AV systems. Free shipping to Continental US only !

Each little bass-engine is generously specified with custom installation in mind, providing versatile input and control options including RS232 and a dedicated ‘SubConnect’ PC applet via a wired USB interface.

The compact rigid 18 mm MDF cubic cabinets with regular 30 cm dimensions incorporate no fewer than three robust, similarly sized 10" C-CAM drivers. Each system array comprises an active high-excursion drive unit powered and trimmed by potent DSP-tuned amplification, together with twin side-mounted ABRs ( Auxiliary Bass Radiators ).

Specifications

System Format: Active sub-woofer system – twin ABR 18 mm MDF cabinet ( CARB2 approved )

Lower Frequency Limit: 32 Hz ( -6 dB )

Amplifier Output: 400 watt RMS @ < 1% THD+N

Maximum SPL: 105.8 dBA

Amplifier Classification: Class D amplifier with switch mode power supply ( SMPSU )

Inputs: Stereo RCA LFE ( RCA ) LFE balanced ( XLR )

EQ: Flat / music / movie / impact

Phase Control: 0 & 180 degrees

Auto Sensing: LFE Input <2mV Auto wireless audio input signal detection

Auto Standby: After approximately 15 minutes if no signal sensed Wireless audio source turned off

Drive Unit Complement: 1 x 10" C-CAM long throw driver, 2 x 10" ABR

Input Impedance: > 20 ohms

Mains input voltage: 110 - 120 VAC 50 / 60 Hz ( Manual Switch selection )

Dimensions: including feet ( H x W x D ): 12 3/8"  x 12"  x 12 5/8"

Trigger Input: 5 - 12 Volt via 3.5 mm mono mini-jack socket

Power consumption: Standby: < 0.5 Watts;  Typical Idle: < 10 Watts;  Max Rated: 400 watt

Weight (unpacked): 27 lbs 12 oz