The IA 200-2C Installation Amplifier supplies up to 200 watts per channel at 4 ohms. As a Monitor Audio ‘Connect’ amplifier, it utilizes our Connect IP interface, a web application which can be accessed by any device connected to the internet with a web browser on the same network.

A slim 1U rack height, it universally fits into most racks whilst delivering 93% energy efficiency. The IP control is via the RJ-45 input, controlling power On / Off, volume, muting, and input source selections. A visual match for the rest of the Monitor Audio Installation Amplifier line, the IA 200-2C is ready for any project.

Monitor Audio IA200 User's Manual

Specifications

'Connect' IP Control: Yes

Channel Number: 2 (1 Stereo Pair)

Power ( watt / Channel) | 4 ohms: 200 watt

Power ( watt / channel) | 8 ohms: 150 watt

Power ( watt / channel) | Bridge ( 8 ohms ): 470 watt ( 1 channel )

Power ( watt / channel) | 70 Volt

Input Impedance: 20k ohms

Output impedance ( Loop RCA ): 600 ohms

Input Sensitivity: 100 mV / 1 Watt, 1230 mV – Full power

Maximum Input Voltage: 2.9 Volt

Signal to Noise Ratio: -100 dB ( 20 Hz – 20k Hz )

Frequency Response: 5 Hz – 50k Hz

Total Harmonic Distortion THD + N @ 1k Hz: 0.03%

Rack Height: 1U

Dimensions: including feet ( H x W x D ): 2 ^1/16" x 17 ^1/4" x 16 ^13/16"

Width ( including rack brackets ): 19"

IP Communication: TCP / IP ( RJ-45 10 / 100 Base T )

Mains Operating Voltage: 
    100 – 120 VAC @ 60 Hz
    220 – 240 VAC @ 50 Hz

Fuse Rating: 5 A ( T5AL ~ 250 VAC )

Standby Power Consumption: <0.5 Watt ( green mode )

Networked standby power consumption: <2 Watts

Weight: 11 lbs 10 oz